Instructions for Use
28
Timer
(some models only)
Timer is used to preset the time when you want
the machine to start washing. This is specially
convenient for the period when electricity is
cheaper or you want your laundry to be washed
when you arrive home.
You can set the beginning of washing for 12
hours ahead. Numbers on the knob are hours.
Rotate the knob clockwise the end position and
then back to the selected setting (D knob).
After the preset time elapses, the knob stops on
the position "I" and the machine starts washing.
If you want the machine to start washing
immediately after you've selected the adequate
programme, the timer has to be on position "I".
Spinning-OFF Knob
Using this switch the intermediary and final
spinning of all programmes are switched-
OFF.
Pump Stop Pushbutton
This switch can be used for all
programmes whenever wishing the laundry
to remain in the last rinsing water. When
this switch is off the washing programme
ends with a spin cycle.
Extra Rinsing Switch
All washing programmes are designed for
the optimum use of water, during the
washing as well as during the rinsing cycle.
Use the extra rinsing cycle if you are allergic to
washing agents. This switch is operating only with
the programs for resistant laundry (A-F) and can
be switched on at the beginning of washing or
prior to rinsing.
Higher water level Switch
Washing under programmes for resistant
laundry (programmes A and B) is carried
out with a low water level, the quantity of
water is automatically adjusted to the amount of
laundry. This guarantees successful and
economic washing, regardless of the amount of
laundry.
When washing heavily soiled laundry the
water level can be increased by pressing this
switch.
It is impossible to change the water level in
programmes for delicate linens and woolens.
Lower RPM
With this switch you reduce the number of
revolutions, which is especially
recommended for washing delicates.
If the switch is off, the number of revolutions
during the spin cycle is higher.
The number of revolutions varies according
to model.
Half Programme Switch
If the amount of laundry you intend to wash
is smaller, use the half programme (up to
2.5 kg).
This will help you save energy and water.
Don't forget to use less washing powder as
well.
Washing machine without temperature
selection knob
Half programme switch may be used only with
programmes for non-delicates (95
°
C).
If you use the half programme switch for other
programmes, the washing temperature will be
higher than marked for individual programme.
Washing machine with temperature selection
knob
Half programme switch may be used with all
programmes for non-delicates. On programmes
for delicates and woolens, this switch won't work.
Cold Wash - Switch
If you switch the cold wash switch, the
heaters are off and all programmes are
washing with cold water. The duration of
the programme is the same as if the
heaters were on.
ON/OFF switch
Select suitable washing programme,
prepare the laundry for washing and press
the ON/OFF switch to switch the machine
on.
Prepare your machine for washing
−
Select laundry and load a suitable amount.
−
Close the door (push it towards the machine).
−
Fill the dispenser (in the correct sections).
−
Check water inlet and outlet.
−
Choose the right programme.
D
D
Summary of Contents for WA1022
Page 17: ...Instructions for Use 30 31 ...
