30
354011
Spinning
To change the spinning rate, in steps
Each program has a preset spinning rate which can be changed by
pressing the (4) key. You may also choose to drain the water from
the drum without any spinning (DRAIN).
The last setting is "stop pump"(RH) – the laundry remains soaked
in water from the last rinse.
Use this option if you wish to prevent creasing of the laundry when
you know you do not have the time to take it from the washing
machine immediately after the washing program is completed.
Spinning rate is indicated in the display above the key.
Start delay / Washing program completion
(end) time
Use this function to start the washing cycle after a certain amount
of time has elapsed.
When the (5) key is pressed, the display above the (5) key will read
0:00 and estimated program completion time will be displayed on
the information display (9). (Before using this setting, make sure
you have correctly set the time of day.)
By pressing the (5) key, you can adjust the time in 30-minute steps
(up to 5 hours) and by 1-hour steps for periods longer than 1 hour.
Max. setting of the wash completion time is up to 1 day.
If nothing is pressed for 5 seconds, actual washing time will be
displayed. To set the delayed start/program completion time
again, press the (5) key.
•
To interrupt or change the delayed start/program completion
time, press the START/PAUSE key. Press the (5) key to select
a new program completion time and confirm it by pressing the
START/PAUSE key.
•
To quickly cancel the setting of the delayed start/program
completion time, press the (5) key and hold it for 3 seconds;
then, press the START/PAUSE key to resume the washing
program.
•
In case of a power supply failure, press the START/PAUSE key
to resume.
4
5
