PV detection
The connection of the PV module to the heat pump must be performed by a qualified expert. On the back side of the heat pump,
under the connection cord, there is a PV connection port. The PV port is shown in
figure 16
. Use a connection cord (minimum
inner cross-section 0,5 mm
2
, H05VV-F 2G 0,5 mm
2
and maximum external cross-section of 10 mm). The removal of the cover is
described in the chapter above
Connect the cord to the clamp, located under the control unit. The connection location is marked with PV.
Use ports 1 and 2.
Figure 16:
PV connection location
Figure 17:
PV connection port
1
2
PV
36
EN
689886
