Gorenje SBR 1000 E, Instruction Manual

Page: 22 / 59

22
Safety lock
For your own protection the model SBR1000E has
built-in safety lock system. It prevents the run of the
appliance until the food processor is not assembled
correctly.
When you choose your accessory (for example,
blender), you must place it properly on the motor unit.
You can use only one accessory at the same time.
The chosen accessory is placed correctly when the
signs on the motor unit and on each accessory are in
the same way. Then you must turn selected accessory
clockwise and you will hear a "click".
When finished the working, you must turn the chosen
accessory anti-clockwise.
For better understanding check the photos B,C and D.
Control panel

After properly placing the selected accessory on
the motor unit, turn the operation knob to activate
the unit from its off position. Choose the reqested
speed.

For int
ermittent use, press onto “PULSE” or “ICE”
button.
CAUTION: Button
“PULSE” must be held in
“PULSE” position for appliance to run. Food
processor will stop as soon as button is released.
When choosing “ICE” button, you do not have to
hold this button for appliance to work.

You should use PULSE and ICE functions to
prevent over blending of foods.
CHOPPER
CAUTION : Make sure that the unit is unplugged from
power source and operation button is on “OFF” before
inserting or removing any attachments and before
cleaning.
WARNING: Use extreme caution, blades are sharp.

IMPORTANT: The chopper bowl will not operate if
the security cover is not closed correctly and if it is
not placed properly on the motor unit.
WARNING: To reduce risk of injury, never place
the chopping blade on the motor unit without
first putting the bowl properly in place.

Place the motor shaft firstly on the motor unit.
After this place the bowl for chopper correctly on
the motor unit. The signs on the motor unit and on
chosen accessory must be in the same way. Then
you must turn selected accessory clockwise and
you will hear a "click".

Place the chopping blade on the shaft inside the
bowl.

Make sure that the chopping blade is correctly
positioned in its place.

When the chopping blade is placed, put the
chosen ingredients in the bowl. Then place the lid
of the chopper correctly and turn on the appliance.
For better understanding check the photo B.
WARNING: Use extreme caution
– Blades are
sharp, handle carefully. Always hold the
chopping blade by the upper plastic part. After
using the chopping blade, always take it out of
the bowl before removing the processed food.

Keep hands and utensils away from the cutting
blade while chopping food, to reduce the risk of
severe injury to persons or damage to the food
chopper. A spatula may be used, but must be used
only when the food processor is not running.

Never feed food by hand. Always use food pusher.

Do not leave the appliance unsupervised when it is
operating i.e. when it is “ON”.
Continuous Slicer / Shredder
CAUTION: Make sure that the unit is unplugged from
power source and operating button is on” “OFF” before
inserting or removing attachments.

If using the blades (discs) instead of chopper, the
procedure of preparing the appliance is the same
as for chopper accessory. Just instead of chopping
blade you should use your chosen disc. The
selection of the disc depends on your wishes
regarding food preparation.
Check the picture B for better understanding.

WARNING: Use extreme caution
– blades are
sharp. Handle carefully.
BLENDER AND COFFEE GRINDER
CAUTION : Make sure that the unit is unplugged
from power source and operation button is on “OFF”
before inserting or removing any attachments and
before cleaning.

IMPORTANT: Your blender and coffee grinder use
the same cutting blade. When you select the
accessory (blender or grinder), you need to select
the grinder cup or bowl for blender as well. After
this you must screw it on the cutting blade. Do not
forget about adding O-ring seal (picture A, 12).

Place the assembled blender on the motor unit
correctly. The signs on the motor unit and on the
blender must be in the same way. Then you must
turn selected accessory clockwise and you will
hear a "click". When finished the working, you must
turn the chosen accessory anti-clockwise. You
must put the ingredients into the bowl of the
blender after the blender is placed on the motor
unit properly.
Check the photo D at the beginning of the manuals.

The procedure is absolutely the same if you want
to use coffee grinder instead of blender.
IMPORTANT: If using grinder, you must firstly put
the ingredients into the grinder cup. After this you