4
INSTALLATION INSTRUCTIONS
Selecting installation place
Read completely and then follow step by step.
Indoor unit
•
Do not expose the indoor unit to
heat or steam.
•
Select a place where there are
no obstacles
in front or around the unit.
•
Installation space must provide
good air circulation.
•
Make sure that condensation
drainage can
be conveniently routed away.
•
Do not install near a doorway
.
•
Ensure that the space on the left and right
of the unit is more than 12cm
•
Use a pillar finder to locate studs to prevent unnecessary damage to the wall.
•
The indoor unit should be installed on the wall at a height of 2.3 meters or more from
the floor.
•
The indoor unit should be installed allowing a minimum clearance of 15cm from the
ceiling.
•
Any variations in pipe length will/may require adjustment of refrigerant charge. For
distances to 5 m additional charge is not necessary. For distances more than 5 m
additional charge of 20g must be added for each passing meter
.
Outdoor unit
•
If an awning is built over the outdoor unit to
prevent direct sunlight or rain exposure,
make sure that heat radiation from the
condenser is not restricted.
•
Ensure that the clearance around the back
of the unit is more than 30cm and left side is
more than 30cm. The front of the unit should
have more than 200cm of clearance and the
connection side (right side) should have more
than 60cm of clearance.
•
Do not place animals and plants in the path of
the air inlet or outlet
.
•
Take the air conditioner weight into account and
select a place where noise and vibration will not be an issue.
•
Select a place so that the warm air and noise from the air conditioner do not disturb
neighbors.
Picture 2
Picture 1
Picture 2
