Instructions for Use
14
Approximate Storage Time forFrozen Foods
Food
Storage time (in months)
1
2
3
4
5
6
7
8
9
10
11
12
Vegetable
+
+
+
Fruit
+
+
+
Bread, pastries
+
Milk
+
Ready-made meals
+
Meat: Beef
+
+
+
Veal
+
+
+
Pork
+
+
+
Poultry
+
+
+
Game
+
+
+
Minced meat
+
Smoked sausages
+
Fish: lean
+
fat
+
Offal
+
Defrosting Frozen Food
Partially thawed or defrosted foods should be used as soon as
possible. Cold air preserves the food but it does not destroy
microorganisms which rapidly activate after defrosting and
make foods perishable.
Partial defrosting reduces the nutritional value of foods,
especially of fruits, vegetables and ready-made meals.
Ice Making
Recommended thermostat position for ice making is on the
middle setting.
Fill two thirds of the ice tray with cold water or any other liquid
convenient for freezing. Insert the ice tray into the guides or on
the cooling plate.
Time required for the ice to form, largely depends on ambient
temperature, thermostat setting and on how often you open the
door. It usually takes 2-6 hours (depends on which model of
refrigerator you have). With smaller refrigerators we
recommend you make a stock of ice cubes (store them in a
separate plastic box).
The easiest way to empty the ice tray is to turn the tray around,
pour it with cold water and slightly twist it (bend it).
Changing the Direction of Opening the Door
If you find the direction of opening the door on your appliance
inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory.
•
Unscrew the kick-plate and remove it by pushing
downwards.
•
Unscrew the lower hinge and take off the lower door together
with the middle hinge washer.
•
Unscrew the middle hinge and take off the upper door
together with the upper hinge washer. Remove the fastener
on the opposite side of the appliance (on the place where
the middle hinge is fixed).
•
Unscrew the upper hinge fastener and fix it on the opposite
side of the appliance.
•
Take off, change and replace the door hinge fixture and the
fixture plugs.
•
Put the upper hinge washer and the upper door on the upper
hinge fastener.
•
Rotate the middle hinge for 180° and fix it on the opposite
side of the appliance. Put the middle hinge washer and the
lower door on the hinge from the lower side.
•
Put the lower hinge on the lower door and fix it.
•
Replace the cover plate of the lower hinge to the opposite
side of the kick-plate and place it to the appliance.
•
In case your appliance is equipped with a handle mounted
on the side of the appliance, take it off and replace it on the
other side. (If there is more than one handle, replace them
all, following the same procedure.)
Some screws are covered with caps. Take them off before
undoing the screws.
•
Use the decorative caps and plug the remaining middle
hinge holes as well as the remaining holes of the side
handles (if you have a model with side handles).
•
Check the gasket, it shouldn't be creased and it should seal
well.
