Gorenje IT984USC, Instructions For Use, Installation, And Connection

Page: 13 / 36

285764
Switching on the hob and setting the power
The power has 9 settings. There is also a ‘boost’ setting, which is
indicated by a ‘P.’ in the display.
1. Put a pan on a cooking zone.
2 Touch the On/Off button.
You will hear a short bleep and the display for each cooking
zone will show ‘0.’. The red light to the right above the On/Off
button is constantly illuminated. If no further action is taken,
the cooking zone will automatically switch off after 10 seconds.
3. Use the button or the button in the desired cooking
zone to choose the correct setting. The hob will automatically
start in the chosen setting (if it detects a pan).
- Touching the button for the fi rst time displays setting ‘4.’.
- Touching the button for the fi rst time displays setting ‘9.’.
Tip
You can touch and hold the or the button to set
the desired power faster.
• Pan detection
-
If the hob does not detect a (ferrous) pan after the cooking
power has been set, the pan detection symbol and the
selected power setting will
fl ash alternately on the display
and the hob will remain cold. If a (ferrous) pan is not placed
on the cooking zone within 1 minute, the cooking zone will
automatically switch off.
• Residual warmth indicator
- A cooking zone that has been used intensively will retain
heat for several minutes after it has been switched off. An
'H.' appears in the display as long as the cooking zone is
hot.
Settings
13
Operation