manualshive.com logo in svg

Gorenje IT635SC, Instructions For Use, Installation, And Connection, Page: 16 / 28

Share
Download
Gorenje IT635SC Instructions For Use, Installation, And Connection Download Page 16

3890

7

6

The cooking hob is fi tted with overheating protection 

sensors. If the temperature rises too high, individual 

cooking zones or even the entire cooking hob can be 

temporarily switched off  automatically. 

Error, possible cause, solution

•  Continuous beep and Er03 fl ashing on the display.

-  Water spilt over sensor surface, or an object placed 

over the sensors.

Wipe the sensor surface.

• Flashing E/2

-  The cooking zone has overheated. Wait until it cools 

down.

• E/3 fl ashes

-  Unsuitable cookware that lacks ferromagnetic 

properties. Use another pot or pan.

  In case of an operation failure or if the fault / 

error indication does not disappear, disconnect 
the cooking hob from the power mains for a few 
minutes (undo the fuse or turn of the main switch); 
then, reconnect it to the power mains and turn on 
the main switch key.

If the problems persist, call a service technician.

Safety functions and 
error display

16

Summary of Contents for IT635SC





























Reviews:

No comments