27
512850
A (mm)
B (mm)
C (mm)
50
20
5
The rear wall of lower cabinet in the area of cut out has to be open, for to ensure the air
exchange.
The front reinforcement of furniture should be removed, for to enable of creation of
opening for passage of air, at least in a height of 5 mm under the sink over the whole
length of appliance.
The eventual reinforcements under the sink should be removed at least in the area of sink.
The distance between the induction cooking plate and kitchen furniture, or other built in
appliances, eventually, should be chosen so, that the sufficient ventilation of induction
cooking zones would be provided. The minimal distance 50 mm of kitchen unit content
(the content of drawer) from the plate cover should be observed.
The excessive heating up from below – for instance from the built in stove without cooling
ventilator - should be prevented.
When at eventually built in stove (roaster) – located under the built in cooking plate – a
pyrolysis process (high frequency cleaning) is in operation, than the induction cooking
plate should not be used.
