Service
Read the chapter Troubleshooting before contacting the
service department. Provide the details on the serial number
plate in all contact. Include the article number (1) and the
serial number (2).
Connection to water supply
Use only the supply hose provided with the dishwasher. Do
not re-use old hoses or other spare supply hoses.
The supply pipe must be fitted with a stopcock. The stopcock
must be easily accessible, so that the water can be shut off
if the dishwasher has to be moved.
Once the installation is complete, the stopcock should be
opened to allow the pressure to settle for a while and to
check that all connections are tight.
Connect to cold water...
If you use oil or electricity to heat your home.
Electrical connection
Information about the electrical connection can be found on
the serial number plate. This specification must match the
electricity supply.
The dishwasher must be connected to an earthed socket.
The electric wall socket must be placed outside of the
installation area to be easily accessible after installing the
dishwasher. Do not use an extension cord!
15
Repairs and maintenance relating to safety or
performance must be carried out by a
qualified professional.
1
When the drainage hose is routed to a connection
nipple on the sink unit's water trap (see illustration 1),
please note that the hose must be attached at the
same height as the underside of the sink unit, otherwise
dishwater from the sink may flow back into the
dishwasher For other connection alternatives, see
illustrations 2 and 3.
2
3
