Gorenje GS66260, Operating Instructions Manual

Page: 10 / 36

Quick wash
This programme is used for glasses and
porcelain that is slightly dirty, such as
coffee cups.
In combination with SpeedWash, a shorter
programme is achieved (15 minutes).
Rinse
Used to rinse dishes while you wait for the
dishwasher to become fully loaded.
EXTRA - Select an option
To select an option, press one of the
option buttons until the option is activated.
The available options vary between
programmes and some options cannot be
combined (available options glow dimly).
SpeedWash
This option shortens the programme time,
but uses more energy and water.
Auto open
The dishwasher door opens automatically,
which improves the drying results. Wait
until the dishwasher indicates that the
programme has ended and the dishes
have cooled before unloading the
dishwasher. (If the dishwasher is built-in
the surrounding furnishings must be
resistant to any condensation from the
dishwasher.)
NOTE!
The dishwasher door must not be
blocked when set to open automatically.
This can disrupt door lock functionality.
Extra hygiene
This option is intended for situations
where demands on hygiene are especially
high, such as when dishwashing baby
bottles and cutting boards. The
temperature is increased in both the main
wash and the final rinse.
Delayed start
When you select Delayed start the
dishwasher will start 1-24 hours after you
close the door.
1. Press the button once to activate
Delayed start. Press the button several
times – or hold it in – to set the desired
number of hours.
2. Close the door and the dishwasher
counts down 1 hour at a time and starts
after the selected delay.
If you want to cancel the Delayed start
option, open the door and press and hold
the main power switch until the display
turns off.
Starting the dishwasher
Close the door to start the dishwasher. If
the main power switch is on the
dishwasher will start automatically when
the door is closed.
TIME - Time remaining
Once you have chosen a programme and
options, the time the programme took
when last used is displayed.
Once you have started the dishwasher
the display shows the remaining
programme time. The remaining time is
updated after the water for the final rinse
has been heated.
10