background image

Instructions for Use, Building- in and Connecting

23

 Safety precautions

To avoid any possible hazard, the appliance may
be installed by qualified personnel only.

Operation of gas burners normally releases heat
and humidity into the room, so that the location in
which the gas cooker is installed must be properly
ventilated. Open door or window should in most
cases prove adequate, but if the appliance should
operate powerfully for a prolonged period this
should call for stronger ventilation or the operation
of the kitchen hood.

Never use the burners if the flame of the outlet
gas is unstable.

In case you should smell gas in the room,
immediately shut the main gas supply valve at the
gas tank or the gas installation, extinguish all open
fires (including the cigarette), and abundantly
ventilate the room. Do not switch any electrical
devices on, and call the qualified gas personnel at
once!

The main gas supply valve must be shut also in
case you do not intend to use the gas burners for
any considerable amount of time (i.e. leaving for a
vacation).

Particular cooktop areas (especially the hotplates)
may become very hot during operation. Do not let
small children in the vicinity of the cooker and
warn them about the danger of burns.

Hot grease is highly inflammable, so pay extra
attention when preparing food with grease or oil.
Frying in fat or oil (chips) may be carried out only
under constant surveillance.

Hotplates may not operate empty, without dishes
placed on top.

Never use the appliance for heating of the room.

In case of any detected malfunction immediately
disconnect the appliance from the mains supply
and call the service.

The appliance is manufactured in compliance with
the relevant effective safety standards.
Nevertheless, we strongly recommend that
persons with impaired physical, motoric, or mental
capacity, or persons with inadequate experience
or knowledge, do not use the appliance unless
attended by a qualified person. The same
recommendation applies when the appliance is
used by persons of less-than-legal age.

The symbol on the product or on its
packaging indicates that this product
may not be treated as household waste.

Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the environment
and human health, which could otherwise be
caused by inappropriate waste handling of
thisproduct. For more detailed information
about recycling of this product, please
contact your local city office, your household
waste disposal service or the shop where you
purchased the product.

Technical information

Type

PVK61K…

PVK62K…

Dimensions of the appliance
(H/W/D) mm

41/600/530

Electrical connection

AC 230 V

Operating voltage

AC 230 V, 50 Hz

Gas burners

D

 = Triple-ring burner

B

 = large burner

A

 = normal burner

H

 = auxiliary burner

Rear left

1,9/A

1,9/A

Front left

3,5/D

3,0/B

Front right

1,0/H

1,0/H

Rear right

1,9/A

1,9/A

Total burner power (kW)

8,3

7,8

Gas specifications are indicated on the label adjacent to the rating plate.
Gas mains connection (right)

R1/2 EN ISO 10226-1 / -2 or EN ISO 228-1

(Depending on the country-specific connection regulations.).

Category

RU=II2H3
UA=II2H3

Class

3

Summary of Contents for GMS 66 E










Reviews: