Gorenje G6N41IBUK, Instructions For Use, Installation, And Connection, Page: 16 / 28

444650
During the warranty period, only a service center authorized by the manufacturer may
carry out any repairs.
Before making any repairs, make sure the appliance is disconnected from the power mains
either by removing the fuse or by disconnecting the power plug from the wall outlet.
Unauthorized tampering with and repairs of the kitchen range (cooking hob) can result in
electric shock or short circuit; hence, do not attempt to perform any repairs by yourselves.
Leave such tasks to an expert or an authorized service unit.
In case of minor faults or problems with the appliance operation, check the following
instructions to see whether you can eliminate the causes by yourselves.
A visit by a service technician during the warranty period
will be charged if the appliance is not functioning because
of improper use. Store these instructions in a place where
they are always readily accessible; if pas the appliance
on to another person, the instructions should also be
included.
Following is some advice on rectifying some common
problems.
Important
What happened...? Possible cause What to do?
The burners will not burn
The fl ame is uneven /
unstable Flame is uneven due to a
wrong gas power setting. Have an expert check he gas
pipeline!
The fl ame from the burners
suddenly changes Wrongly assembled parts of
the kitchen hob Assemble the burner
correctly.
Burner ignition takes more
time Wrongly assembled parts of
the kitchen hob Assemble the burner
correctly.
The fl ame is extinguished
shortly after ignition Knob pressed too short or
to weakly. Keep the knob depressed
for a longer period of time.
Before releasing it, pres it
harder.
The grid has discolored in
the burner area? This is a commonplace
phenomenon resulting from
high temperature Clean the grid with a metal
care detergent.
Electric power supply in
general is interrupted? The fuse may be blown. Check the fuse in the fuse
box and replace it if it is
blown.
Electric ignition of the
burners no longer works? There are food or detergent
residues between the spark
plug and the burner. Open and carefully clean the
opening between the spark
plug and the burner.
16
SPECIAL WARNINGS AND FAULT REPORTING