Gorenje FS600 ADVANCED, Detailed Instructions

Page: 31 / 36

31
TROUBLESHOOTING
Problem: Cause or remedy:
Appliance is connected
to the power mains but it
does not work. • Make sure there is voltage in the power outlet and that
the appliance is switched on.
Cooling system operates
continuously for a long
period of time: • Too high environment temperature.
• Door opened too frequently or too long.
• Door not closed correctly (possible impurities on the
seal, misaligned door, damaged seal etc.).
• Too much fresh food inserted at once.
• Insufficient compressor and condenser cooling. Check
the air circulation behind the appliance and clean the
condenser unit.
Build-up of ice or frost in
the freezer interior may be
a result of the following: • Door opened too frequently or too long.
• Door not properly closed.
• Poor door sealing.
• If the seal is dirty or damaged, clean or replace it.
Door is difficult to open: • If you are trying to open the freezer door after just
having closed it, this could be difficult to do.
As you open the door, some cool air escapes from
the appliance and it is replaced by warm air from the
environment. When this air is cooled, negative pressure is
generated which results in problems as you try to open
the door. After a few minutes, the condition is normalized
and the door can be easily opened again.
LED lighting does not
work: • If LED lighting does not work, call a service technician.
• Do not attempt a repair of the LED lighting yourself, as
there is danger of contact with high voltage!
If none of the instructions above fixes your problem, call the nearest authorized service
center and state the type, model, and serial number found on the rating plate/label which is
located in the appliance interior.
514083