background image

WE RESERVE THE RIGHT TO CHANGES THAT DO NOT 

AFFECT THE APPLIANCE FUNCTIONALITY.

407754

Problem

Cause

Solution

Signal light 

D

 is 

fl

 ashing:

The appliance has not reached the set temperature yet.

•  Too large quantity of insuf

fi

 ciently cooled food will increase the 

temperature in the freezer chest interior. The light will go off when 
the food cools down to the set temperature.

•  A prolonged power failure
•  Cover opened too frequently or too long.

Cover is dif

fi

 cult to open.

Clogged air evacuation valve on 
the back of the appliance (only 
with some models).

Remove and clean the valve as 
shown in the 

fi

 gure.

Code indicated on the display:

• If 

E3

 appears on the display, call a service technician.

Signal lights 

D

 and 

are 

fl

 ashing:

• If signal lights 

D

 and 

F

 are 

fl

 ashing, call a service technician.

If none of the above solutions seem to 

fi

 x your problem, please call your nearest authorized service technician, 

stating the type, model, and serial number indicated on the rating plate located in the appliance interior. 

Before replacing the light bulb, disconnect the appliance from the 
power mains! 
Use a screwdriver to undo the screw on the plastic cap and 
remove it (see 

fi

 gure).

Then, replace the blown bulb with a new one (E14, 15W). Do not 
discard the bulb with organic waste.

The bulb is a consumable and therefore not covered by warranty.

Bulb lamps used in this appliance are special purpose lamps 
selected for household appliances use only. They are not 
suitable for household room illumination.

Replacing the interior 
lighting bulb

Instructions for use of the appliance can also be found on our 
website at www.gorenje.com / < http://www.gorenje.com />

14

Summary of Contents for FH331IW















Reviews: