441613
• A damp cellar or basement is not an appropriate place for a
freezer chest; the same applies for a balcony or other place
where the appliance would be exposed to direct sunlight.
The freezer chest must be placed on dry and suf
fi
ciently solid
surface which allows it to stand stably and horizontally even
when fully loaded.
• The appliance should not be integrated in a cupboard or other
furniture. Allow at least 2-3 centimeter of clearance around the
chest for free circulation of air.
• Clearance from the wall on the back is de
fi
ned by the hinge.
• The appliance is
fi
tted with a condenser unit which radiates
heat into the environment. The condenser unit is installed on
the back wall. For correct operation, allow suf
fi
cient cooling
of these surfaces; do not block them or line them with any
objects.
Connect the appliance to the power mains using a connection
cable. The wall outlet should be
fi
tted with a ground contact
(safety socket). The speci
fi
ed nominal voltage and frequency are
indicated on the appliance rating plate. The appliance must be
connected to the power mains and grounded in compliance with
the effective standards and regulations.
The appliance will withstand short-term deviations from the
nominal voltage, but not more than +/- 6%.
• The appliance should not be integrated in a cupboard or other
furniture. Allow at least 2-3 centimetres of clearance around
the chest for free circulation of air.
• Freezers are equipped with two spacers. Insert them into the
holes on the rear side in order to determine the right distance
of the appliance from the wall.
Electrical connections
Air circulation around
the appliance
6
