background image

Instructions for Use

4

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regularly
ventilated room. Allowed ambient temperature
depends on the model (class) of the appliance and
is stated on the rating plate of the appliance.
Never place the appliance near heat emitting
devices (e.g. cooker, radiator, water heater and
similar devices) and do not expose it to direct
sunlight.
The appliance should be positioned at least 3 cm
away from the electric or gas cooker and at least
30 cm away from the oil or coal stove. If this is not
possible, use an appropriate insulation.
Behind the appliance there should be free space
at least 200 cm² wide and above the appliance the
high kitchen units should be at least 5 cm away
from the appliance in order to assure adequate
ventilation of the condenser unit.

Class

Ambient temperature

SN (sub-normal)

from + 10°C to + 32°C

N (normal)

from + 16°C to + 32°C

ST (sub-tropical)

from + 16°C to + 38°C

T (tropical)

from + 16°C to + 43°C

Placing the Appliance

• 

Place the appliance firmly on a solid base. Level
it with the two adjustable feet, located on the
front.

• 

The appliance with ventilation grid may be
placed close to the wall. The grid enables
sufficient air circulation, required for adequate
ventilation of the rear wall.

Connection to Power Supply

Connect the appliance with the cable and plug to
the power supply socket outlet with a ground
terminal (safety socket).
Required nominal voltage and frequency are
indicated in the rating plate. The connection to the
mains supply and earthing have to be made
according to current standards and regulations.
The appliance resists temporary voltage tolerance
up to -6 to +6 %.

Summary of Contents for F4105W










Reviews: