![background image](http://html1.mh-extra.com/html/gorenje/f3092anw/f3092anw_instructions-for-use-manual_2245310006.webp)
• The appliance should be installed in a dry and well ventilated room.
The appliance will operate correctly if the environment temperature
is within the ranges listed in the table below. The appliance class is
indicated on the label with the basic information on the appliance.
Class
Temperature
SN (subnormal)
from +10°C to +32°C
N (normal)
from +16°C to +32°C
ST (subtropical)
from +16°C to +38°C
T (tropical)
from +16°C to +43°C
Appliance installation should be carried out by at least two
persons to avoid any physical injury or damage to the appliance.
• The appliance should stand fi rmly in an upright position on a
suffi ciently solid base. At the front, the appliance is fi tted with
two adjustable legs that can be used to level the appliance
(only with some models). Rear side of the appliance is fi tted
with wheels (certain models only) facilitating the positioning of
the appliance at the preselected place.
• If there is a kitchen furniture element above the appliance, there
should be a clearance of at least 5 centimeters between this element
and the refrigerator, to ensure suffi cient cooling of the condenser unit.
• Do not expose the appliance to direct sunlight and do not
place it near sources of heat. If this cannot be avoided, install
an insulation panel.
• Use the power cord to connect the appliance to the power
mains. The wall outlet should be fi tted with a ground contact
(safety socket). Nominal voltage and frequency are indicated
on the label with basic information on the appliance.
• The appliance should be connected to the power mains and
grounded in compliance with the relevant effective standards
and regulations. The appliance will withstand short-term
deviations from the nominal voltages, but not more than from
-6% to +6%.
Selecting the room
Installing the appliance
Connecting the
appliance
6
Installation and connection