background image

Instructions for Use

3

• 

Before freezing packages of fresh foods,
make sure they are cooled to ambient
temperature.

• 

Ice and frost layer increase energy
consumption, so do clean the appliance as
soon as the layer is 3-5 mm thick.

• 

If the gasket is damaged or if it turns out
that the sealing is poor, the energy
consumption is substantially higher. To
restore efficiency, replace the gasket.

• 

The condenser on the rear wall should be
always clean, free of dust or any impurities.

• 

Always consider instructions stated in
sections Positioning and Energy Saving
Tips, otherwise the energy consumption is
substantially higher.

 Important

• 

If you've bought this appliance to replace an
old one equipped with a lock that cannot be
opened from inside (lock, bolt), make sure
that the lock is broken. This will make it
impossible for the children to lock
themselves in the appliance and suffocate.

• 

Mind to connect the appliance correctly to
the mains supply (see Connection to the
Mains Supply).

• 

Do not touch the cooled surfaces while the
appliance operates, especially not with wet
hands, because the skin might stick to the
cold surfaces.

• 

Do not freeze bottled drinks, especially not
fizzy ones such as mineral water, sparkling
wine, beer, cola etc., because liquid
expands during freezing and the glass bottle
is very likely to blow up.

• 

Never try to eat frozen food (bread, fruit,
vegetables), because you may get
frostbites.

• 

Carefully check the foods for color and
smell and if you are in doubt about their
quality, throw them away because they may
be spoiled and therefore dangerous to eat.

• 

Disconnect the appliance from the mains
before repairing (only a qualified technician
should repair it) and before cleaning.

• 

Do not defrost the appliance with other
electric devices (hair dryer etc.) and never
scrape the ice or frost layer with sharp tools.
Use only enclosed tools or tools
recommended by the manufacturer.

• 

For the sake of environment protection - be
careful not to damage the rear wall of the
appliance (the condenser unit or the tubes -
for example when moving the appliance) or
any part of the refrigerating system inside
the appliance.

• 

The refrigerating system of the appliance is
filled with refrigerant and oil, so when the
appliance is damaged, handle it with care

and dispose it of in compliance with
environmental protecting precautions. (See
We Care for the Environment).

• 

Heating element incorporated in the
appliance, all around the rim, is controlled
by the operation of the compressor and it
prevents the door gasket to freeze on to the
freezer compartment.

• 

When activating the “Super” function, the
red light may turn on. This is normal
condition and there is no need for warning.

• 

If the supply cord is damaged, it must be
replaced by the manufacturer or his service
agent or a qualified person in order to avoid
hazard.

• 

The rating plate is in the interior or on the
rear wall of the appliance.

The symbol on the product or on its
packaging indicates that this product
may not be treated as household

waste. Instead it shall be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of
thisproduct. For more detailed information
about recycling of this product, please
contact your local city office, your
household waste disposal service or the
shop where you purchased the product.

Downloaded from Fridge-Manual.com Manuals

Summary of Contents for F 50106 W










Reviews: