Instructions for Use, Building- in and Connecting
11
Installation instructions
Caution !
x
Panels and furniture lining of the kitchen
cabinet receiving the hob must be treated with
temperature resistant adhesives (100°C),
otherwise they might be discoloured or
deformed because of inadequate temperature
resistance.
The cooking hob is intended for building into the
worktop above the kitchen element of 60 cm
width or more.
x
Bottom kitchen element must not be equipped
with a drawer. If the kitchen element has a
built-in horizontal shelf, it must be at a distance
of not less than 15 cm from the bottom surface
of the worktop. The space between the shelf
and the cooktop must be empty and may not be
used for storage of utensils.
x
The use of hard wood decorative borders
around the worktop behind the appliance is
allowed, in case the minimum distance remains
as indicated on the installation illustrations.
x
Minimum distance between the built-in cooktop
and rear wall is indicated at the illustration for
the installation of the built-in cooktop.
x
The appliance may be installed in any worktop
with a thickness from 30 mm to 50 mm.
x
In case there is a drawer in kitchen cabinet
under the built-in hob, it is necessary to install
an additional horizontal barrier of height 6 cm
under the hob and above the drawer.
Dimensions of the built-in hob opening
Installation procedure
x
Worktop must be placed absolutely horizontal.
x
Suitably protect the edges of the cut aperture.
x
By means of the supplied screws (4) fasten the
supplied tightening brackets (4) to the front and
the rear side of the cooking hob and to the
prepared aperture.
x
Connect the cooking hob to the mains power
supply and to the gas supply (see instructions
for the connection of the cooking hob to mains
power supply and gas supply)
x
Stick the supplied self-adhesive seal to the
bottom edges of the cooking hob.
x
Insert the hob into the cut aperture.
x
Press the hob firmly towards the worktop from
above.
