EN 26
INSTALLATION AND
CONNECTION INSTRUCTIONS
APPLIANCE PLACEMENT
(mm)
The walls or furniture adjacent to the appliance
(floor, rear kitchen wall, side walls) have to be
temperature-
resistant to at least 90°C.
PREVENTION FROM TIPPING OVER
(mm)
According to the plan attach the holder to the
wall with the added screws and anchors. If the
attached screws and anchors cannot be used, use
others that will ensure a secure installation on the
wall.
LEVELLING THE APPLIANCE AND
ADDITIONAL SUPPORT
(depending on the model)
ADJUSTING THE HEIGHT OF THE
COOKER
(depending on the model)
The height of the cooker is 900 mm. You can adjust
the height of the appliance from 850 to 940 mm.
1. Put the cooker on the floor with back side.
2. Unscrew the screws, see arrows.
Torx T20
3. Set the desired height.
4. Screw the screws back together.
The cooker must be installed horizontally!
