background image

6

348248

The system consists of a compressor and heat 
exchangers.

After running the dryer, compressor operation, or the 
sound of flowing liquid, may be somewhat louder. This 
is not a sign of malfunction and it will not affect useful 
life of the appliance. In time, dryer operation and this 
noise will become more quiet.

Leave any repairs and similar tasks on the dryer to an 
expert.

Unprofessional repair may result in an accident or major 
malfunction. Call the authorized service department (see 
list of service departments attached).

The warranty does not cover 

(consumables (light bulbs), 

minor deviations in colour, increased noise which is a 
consequence of the appliance age and does not affect 
the functionality of the appliance, and aesthetic defects 
on components that do not affect the functionality and 
safety of the appliance.

The appliance is manufactured in compliance with all 
effective safety standards. 

Nevertheless, we recommend it is not used by persons 
with impaired physical or mental abilities and motor 
skills, or persons with deficient experience or knowledge, 
without due supervision. The same recommendation 
applies to the use of appliance by minors.

Summary of Contents for D8664N

















































Reviews: