Gorenje BHC532X, Instruction On Mounting And Use Manual

Page: 9 / 11

- 9 -
During this time key F and key C must flash at the same time.
After ten minutes the motor switches off and the LED of key
F
remains switched on with a fixed light until the motor starts
up again at the first speed after fifty minutes and keys F and C
start to flash again for ten minutes and so on.
By pressing any key for the exclusion of the hood light the
hood will return immediately to its normal functioning (e.g.
if key D is pressed the “ clean air ” function is deactivated and
the motor moves to the 2nd speed straight away. By pressing
key
B
the function is deactivated).
(*)
The “
AUTOMATIC STOP TIMER
” delays stopping of the
hood, which will continue functioning for 15 minutes at the
operating speed set at the time this function is activated.
• Anti-grease/active charcoal filters saturation:
- When the A key flashes with a 2 second frequency the anti-
grease filters must be washed.
- When the
A
key flashes with a
0.5 second
frequency the
active carbon filters must be replaced or washed depending
on the type of filter.
Once the clean filter has been put back one must reset the
electronic memory by pressing the
A
key for approximately
5
seconds
until it stops flashing.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.