Gorenje BC5348DX, Instructions For Use Manual

Page: 5 / 88

230844
Back-/Bratvorgang wird abgebrochen und die Zeitschaltuhr zeigt die Tageszeit an.
• Sie können die einzelne Zeiteinstellung auch löschen, indem Sie diese zuerst durch Berühren
der Sensortaste (A) auswählen und dann durch gleichzeitiges Drücken (1 Sekunde lang) der
Sensortasten (B und C) löschen. Sie können die Einstellung auch löschen, indem Sie den Wert
auf 0.00 stellen.
Sensor keys:
A
Settings selection and con fi rmation
sensor key
B Value decease (minus) sensor key
C Value increase (plus) sensor key
Display:
1
Oven operation duration
2 Oven operation stop time
3 Countdown alarm timer
4 Time of day
5 Child lock
6 Clock – time display
• Select the type of setting you wish to make by pressing the (A) sensor key. The selected symbol
on the display fl ashes quickly, indicating the function that you can set or change. After fi ve
seconds, the symbol starts fl ashing more slowly and the time set is displayed. The symbols that
are lit are selected, but not currently shown on the display (6). The most recent setting made is
always displayed.
• Each press / activation of a sensor key is acknowledged by a beep.
• If one of the value settings sensor keys (B) or (C) is touched and kept pressed, the rate at which
the value being set is changing will increase.
• When the appliance is connected to the power supply or after a power failure, the word “META”
or “GLAS” is fi rst displayed for a short while; then, the display fl ashes for some time. In order to
enable the operation of the oven, use the B and C sensor keys to set the time of day.
• In case of a power failure which lasts less than two minutes, all settings are kept.
To improve the response of the sensor keys, touch them with a larger surface of your
fi nger.
Setting the time of day (clock)
• Set the clock to the current time of day by pressing the settings selection sensor key (A). Then,
select the symbol (4).
• Use the (B) and (C) sensor key to set the exact time of day.
• Con
fi rm the setting by pressing the (A) sensor key again; if the (A) key is not pressed, the setting is
automatically con fi rmed after a few seconds.
5
Electronic digital timer GB IE MT