SKU 93782 For technical questions, please call 1-800-444-3353 PAGE 2
SAVE THESE INSTRUCTIONS
SAFETY WARNINGS AND PRECAUTIONS
1.
Prior to using the Cable Tacker, make sure to read and understand all
instructions and safety precautions as outlined in the cable manufacturer’s
instruction manual.
2.
Never point the Cable Tacker at yourself, other people, or animals. Keep this
product away from children.
3.
Always wear ANSI approved safety impact eye goggles when using this
product. Also, make sure others nearby wear ANSI approved safety impact eye
goggles.
4.
Dress properly. Do not wear loose clothing or jewelry as they can be caught up in
moving parts. Wear restrictive hair covering to contain long hair.
5.
Do not use this product if under the influence of alcohol or drugs. Read
warning labels if taking presciption medicine to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not use this
product.
6.
Replacement parts and accessories: This product must be repaired and serviced
by a qualified service technician only. When this product is serviced, only identical
replacement parts should be used. Use of any other parts will void the warranty.
Only use accessories intended for use with this product.
7.
When not in use, keep the Cable Tacker stored in a clean, dry, safe location
out of reach of children and other unauthorized people.
8.
Other than what is mentioned in this manual, all repairs and maintenance
must be performed only by a qualified service technician.
9.
Avoid unintentional firing. Do not carry the Cable Tacker with your hand on the
Handle (16). Always assume the tool contains Staples (24, 25).
10. Fire Staples (24, 25) into an appropriate work surface only. Do not attempt to
fire Staples into surfaces too hard to penetrate. Do not drive Staples on top of other
Staples, or at too steep an angle. Staples can ricochet, causing personal injury.
Note: Only use the Cable Tacker when its body is placed against the workpiece;
never fire staples otherwise.
11. Do not fire Staples (24, 25) to close to the edge of a workpiece. They may split
the workpiece and fly free, causing personal injury.
12. Maintain labels and nameplates on the Cable Tacker. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
13. Do not attempt to use any other size or type of Staples with the Cable Tacker
other than those mentioned in this manual.
14. WARNING! The warnings and cautions discussed in this instruction sheet cannot
cover all possible conditions and situations that may occur. It must be understood by
the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
