Gordon 93140 Assembly And Operating Instructions Manual Download Page 2

PRODUCT SPECIFICATIONS

SAVE THIS  MANUAL

You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual.  Write the invoice number on the inside of the front
cover.  Keep this manual and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed in this

manual may result in serious injury.

SAVE THESE INSTRUCTIONS

SKU 93140

PAGE 2

For technical questions, please call 1-800-444-3353.

UNPACKING

When unpacking, check to make sure all the parts shown on the 

Parts Lists on page 7

are included.  If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.

IMPORTANT SAFETY INSTRUCTIONS

Item  Description 

Electrical Requirem ents 

Requires 4 “AA” batteries (not included) 

Product C om patibility 

M ay be used with liquid soap, sham poo, or lotion 
* See W arnings 

Storage Capacity 

Approxim ately 16.9 Fluid ounces 

Infra-red Sensor Range 

Approxim ately 1/2” to 4” 

Dim ensions 

8-1/2” High x 5-1/2” Deep x 7-1/4” W ide  

Additional Features 

M ay be used with stand or m ounted on wall 

Unit W eight 

1.50 Pounds 

 

Summary of Contents for 93140








Reviews: