GORAVE SOUL WAY
SOUND BAR
Owner’s Installation and Operation Manual
V1.0 / 03-04-2017
MORE THAN MUSIC
5
3. TV Setup
The GoTV Audio Sender receives audio input from your television’s S/PDIF optical or coax audio output. The GoTV transmitter is
powered from a USB port.
3.1 Connect USB to power
a)
GoTV needs power from an available USB port on your TV. If your TV doesn’t have an available USB port, use the included 5V
USB adapter. The adapter will operate between 90–270 AC line voltage with a line frequency of either 50 Hz or 60 Hz. There
is no need to convert or adjust the unit in any way.
b)
Insert GoTV’s USB plug into your TV’s USB port, or insert GoTV’s USB plug into the supplied USB power adapter.
c)
The LED status indicator will blink slowly indicating that GoTV is powered.
3.2 Connect to TV
a)
Use the included TOSLINK to 3.5mm optical cable to connect your TV’s S/PDIF audio output to the 3.5mm input on the GoTV
Audio Sender.
b)
If your TV does not have a TOSLINK output, connect the TV and GoTV Audio Sender using the supplied RCA to 3.5mm cable.
Audio Cable from TV
LED Status Indicator
3.5mm Input Jack
GoTV Audio Sender
Infrared Receiver for Remote Control
USB Plug for Power
Connected to television’s Coaxial or Optical S/PDIF digital audio output
Coaxial
Optical Toslink
Fig 1: GoTV Audio Sender with USB plug for power and audio cable for input from TV.
