GoPro HERO 7 BLACK, Setup + Troubleshooting Manual

Page: 17 / 52

17
Return to Contents
MOUNTING
+
A
CCESSORIES
ACCESSORY TIPS
FLOATY
Floaty is only tested to float the camera and small mounts
(like mounting buckles).
Works with other floating mounts including The Handler
(Floating Hand Grip), Gooseneck and the grip of the 3-Way
(without the extension arm and tripod).
Be sure to use the correct Backdoor when mounting Floaty.
Adhere it to the door at least 24 hours before use.
MOUNTING BUCKLES INCLUDED WITH ALL HERO7 CAMERAS
When mounting, slide the buckle into place until it clicks
into place. Lock it in using the mounting buckle plug.
Use the Helmet Front + Side Mount for helmet mounting.
ANTI-FOG INSERTS
Used to reduce fog in cold and humid conditions. They
can be reused after baking them for 5 minutes at 300°F.
THE TOOL
THUMB SCREW BOTTLE OPENER
Use when you can’t easily tighten a thumb screw with
gloves on.
WARNING: Be careful not to over-tighten with The Tool,
this can cause cracks in your mount over time.