3.Adjusting the elastic tendency of running belt
Every treadmill must set the elastic tendency before it leaves
factory and after assembly, but it will become loose after using a
period.
Just like it will stuck or slide sometimes, you can turn the adjusting
bolt in clockwise direction, semi-circle a time (left and right at the
same time) to adjust the running belt. Don’t make it too loose or too
tight, or the running belt will slide or make motor over load.
4.Running belt deviating.
All running belt is in the right place when it is packaged. But there
are some factors will cause this situation.
a).The treadmill is not set flat
b).User does not step on the center of the running belt
c).The
situation caused by a or b is easy to be solved, just set the
treadmill flat
and let it idle for several minutes can solved the problem.
If the deviating still exist
s
, you can use the 6mm Allen wrench
to
adjust
it in a quarter turn.
Deviating is not in the warranty scale, user can maintain it
follow
ing
the instructions. But please fix it as soon as you find the
problem or it will break the running belt.
If deviating turns to right, then
turn the left screw in counter-
clockwise direction,
t
urn the right
screw in clockwise direction.
If deviating turns to left, then turn
the left screw in clockwise direction,
turn the right screw in counterclock-
wise direction.
1.Turn the left screw in clockwise direction with Allen wrench
2.Adjust the intensity, when the running belt will not slide during
loading is ok.( clean the debris between belt ditch and belt wheels)
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
