8
FIG.1
ASSEMBLY INSTRUCTION:
1.PREPARATION:
A. Before assembling make sure that you will have enough space around the item.
B. Use the present tooling for assembling.
C. Before assembling please check whether all needed parts are available (at the above
of this instruction sheet you will find an explosion drawing with all single parts (marked
with numbers) which this item consists of.
2.ASSEMBLY INSTRUCTION:
:
FIG.2
FIG.2:
Put the Vertical Seat Post (pt.15) slip
into the seat post tube on the Main
Frame. You will have to slacken the
Knob (pt.10) and pull the knob back.
Then select the desired height. Release
the knob and retighten the knob. Then
put the Seat Post (pt.16) slip into the
Vertical Seat Post (pt.15), use the Knob
(pt.10) to lock.
Finally,the Seat (pt.17) fixed on the
Seat Post (pt.16) as shown, and lock
the nuts under the seat.
FIG.1:
Lock the Front Stabilizer (pt.8) to the
Main Frame (pt.9) with two sets of Ø8
Flat Washer (pt.5), M8 Domed Nut
(pt.6) and M8*67 Carriage Bolt (pt.3).
Lock the Rear Stabilizer (pt.2) to the
Main Frame (pt.9) with two sets of Ø8
Flat Washer (pt.5), M8 Domed Nut
(pt.6) and M8*67 Carriage Bolt (pt.3).
Lock the Protection Cover (pt.23) to the
Main Frame (pt.9) with two Screws
(pt.25)
Summary of Contents for SP36126
Page 1: ...USER S MANUAL Exercise bike SP36126...
Page 4: ...4 EXPLODED VIEW PARTS LIST...
Page 5: ...5...
