A×2+1
×1PC
×1PC
×1PC
B×4+1
C×1
D×2
1
3
2
Seat
Allen Key
Bolts M6*18mm
Bolts M6*30mm
Leg
Leg
Step1
Step2
Step3 Step4
Installation Completed
You can adjust leveling feet to balance
2
2
3
3
D
A
C
B
C
1
1
0
2
3
4
5
Do not tighten all bolts until them haven been installed in corresponding locations.
“+” in below list indicates that additional pieces are replacement parts.
Leveling Feet
2 for replacement
1) There are 5 positions for the chair. The chair you receive lies flat,this is position 0 which is not recommend
because you might fall off the chair. Position 4 and 5 are better choices.Position 1/2/3 are recommended for
use with ottoman and keep your head lower than the backrest.
2) Pull the backrest forward into the position you wish with the sound of “click”
（
the sound represents lock).
3) It can’t return to the previous position once locked,you need to restart the reclining system:
pull the backrest forward to the end,then backrest reclines back to lay flat.
Make sure the
label faces front.
