Goodyear PROFESSIONAL GY 3406, Owner'S Manual

Page: 23 / 76

English
•
Owner´s manual
23
Rod insertion before first use
Insert the M4x16 Allen screws and the M4 nut
into the corresponding seat of the comb (DO NOT
TIGHTEN).
2. Insert a carbon rod into the hole provided
in the protection frame. Repeat the operation
with the other 4 rods.
3. Be sure to position the protective frame respecting
the geometry of the frame holes with those of the
rod. Insert the carbon fiber rod into the holes of the
carbon fiber comb, making sure that it is placed all
the way to the bottom of the housing. Repeat all the
above operations for the other rod.
4. Tighten the screws with the Allen wrench
until the rods are secure and locked.
ATTENTION
Make sure that the carbon rods are properly tightened
every day.