Goodyear L820153G Instruction Manual Download Page 3

TECHNICAL DETAILS

Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of 

hose in use. 

Read the following precautions and instructions before you begin assembly or using. Failure to 

comply with these instructions could result in personal injury or property damage. Keep these 

instructions in a convenient location for future reference.

SAFETY PRECAUTIONS

1. Make sure incoming line pressure does not exceed the rated operating pressure for your 

model hose reel.

2. Use proper eye protection when assembling and using the hose reel. 

3. Assemble the hose reel on a clean workbench. 

4. Use soap and water when checking for leaks. 

5. Keep children away from the work area.

WARNING:

 

Exposure of skin directly to pressurized air, or fluid could result in severe

bodily injury.

INSTALLATION of Reel

1) For overhead ceiling mounting: Install reel at least 10 feet above the floor. 

2) If the reel you have purchased does not have hose included, you will need to purchase and 

attach. Refer to Specifications on box, to determine appropriate hose size and length.

3) You will need to purchase appropriate hardware for mounting your new reel.

1. The reel base has four 12.7mm (1/2”) drilled holes for mounting on a suitable flat surface. 

Figure 2 is a template showing the correct location of the 4 mounting holes in the base.

2. The reel is supplied with a hose guide roller bracket. The bracket position may be 

changed depending on the reel mounting position. Figure 2 shows “Typical Mounting 

positions”. If bracket position needs to be changed, do the following:

Item No.

L820153G
L820154G

M820154G

H820152G

-20~100°C (-4~210°F)
-20~100°C (-4~210°F)
-20~100°C (-4~210°F)

-20~100°C (-4~210°F) 

SBR Rubber
SBR Rubber

S.A.E.1001R1 Wire Braid
S.A.E.1001R2 Wire Braid

3/8"/9.5mm

1/2"/12.5mm
1/2"/12.5mm

 1/4" / 6.35mm

Hose Working 

Temperature 

Max Pressure

Hose Capacity

Material

I.D.

Length

15m/50ft
15m/50ft
15m/50ft
15m/50ft

300Psi (20Bar)
300Psi (20Bar)

2320Psi (160Bar)
5800Psi (400Bar)

E1

TECHNICAL

DETAILS

SAFETY

PRECAUTIONS

OPERATION

LIMITED

WARRANTY

EXPLODED AND

PARTS LIST

INSTALLATION

19.5"

10.4"

19.3"

8.8"

5.6"

9.1"

6.9"

7"

6.7"

7.9"

6"

Summary of Contents for L820153G









Reviews: