Master mute
This is situated at the very end of the circuit before the locking
jacks. Use it to tune silently, as a kill switch for song transitions
without delay and reverb trails, or if you need to troubleshoot your
board without sending unwanted noises to FOH.
The Interfacer can power up muted or un-muted, the choice is
yours. To change this, hold down the foot switch, plug in power and
then immediately release the footswitch.
The LED is on when muted and off when un-muted.
Summing
Hold down the footswitch for two seconds to switch between
stereo and dual mono. The LED will change colour – red is stereo
and blue is dual mono. You can switch modes whether muted
or un-muted. When muted the LED will change colour. When
un-muted the LED will flash the colour that represents the mode
you’re switching to. If it flashes blue, your amps are receiving dual
mono. If it flashes red, they’re receiving true stereo. Changing
modes when un-muted does not activate the master mute
function.
The Interfacer features DMS™ which stands for Dual Mode
Summing. Unique circuitry, designed by Goodwood Audio, that
provides two types of summing, Stereo Sum and Split Sum. The
default setting is Stereo Sum.
Summary of Contents for The TX Interfacer
Page 1: ...THE INTERFACER MANUAL...
