19
5.2 EzLogger Pro Configuration
2. Configuration Method for EzLogger Pro Static IP Address:
If the user has a static IP, it is necessary to switch EzLogger Pro to the static IP mode. That is, press the
Reload key for about 10 seconds to reset and restart EzLogger Pro, The LEDs on EzLogger Pro
will blink one after another from right to left. After restart, EzLogger Pro will be switched to static IP
mode(default IP:192.168.1.200),then modify the computer’s IP address, take WIN7 as an example,
the steps are as below. The user can find the methods from the Internet for modifying IP addresses of
different computer systems.
(1) Switch EzLogger Pro to static IP, then use cables to connect EzLogger Pro “NET” port to the
Ethernet port of the computer.
(2) Turn on the computer, right click on "Network " on the desktop, and click on “Properties”.
(3) Click on “Change adapter settings”.
Figure 5.2-2 Open the Network Connections Window
Figure 5.2-3 Modification of Adapter Configuration