Page
17
of
27
11.1 REPLACEMENT OF THE HEPA FILTER FOR MOTOR COOLING AIR INTAKE (ITEM
#1 ON FIG. 1 SEE SECTION 8 FOR ILLUSTRATION)
1. Disconnect the power cable from the outlet.
2. Unscrew the three hex nuts securing the top section of the power head to the lid
3. Remove and discard the old HEPA filter
4. Carefully inspect the seal gaskets for wear and breaks. Replace gaskets if defective.
5. Place the new filter on the lid.
6. Securely fasten the top section of the power head to the lid using the three hex nuts.
7. Dispose of the contaminated filter according to government regulations. (If applicable)
11.2 REPLACEMENT OF THE HEPA FILTER FOR MOTOR COOLING AIR EXHAUST (ITEM
#2 ON FIG. 1 SEE SECTION 8 FOR ILLUSTRATION)
1. Disconnect the power cable from the outlet.
2. Unscrew the six hex nuts securing the middle section of the power head to the lid
3. Remove and discard the old HEPA filter.
4. Carefully inspect the seal gasket on the HEPA filter. Replace gasket if defective.
5. Place the new filter on the lid.
6. Securely fasten the middle section of the power head to the lid using the six hex nuts.
7. Dispose of the contaminated filter according to government regulations. (If applicable)
Summary of Contents for VAC-EX-120-9-SS
Page 20: ...Page 20 of 27 14 0 EXPLODED VIEW...
Page 22: ...Page 22 of 27...
Page 25: ...Page 25 of 27...
