5
INTRODUCTION
The XB5 operates on a power supply of 230V 50Hz AC.
The XB5 contains the following facilities:
1. Digital audio CD and Graphic player:
2. 2 microphones Input sockets (1 mic is supplied).
3. AVC (Auto Vocal Control) facility.
4. Talk or sing along to music (demo disc supplied).
5. Separate variable microphone volume and system volume controls.
6. Microphone ECHO control and Music / Vocal control.
7. The Audio Out is stereo source but is played in mono through the single speaker
located on the XB5.
INSTALLATION
Carefully remove the unit from its packaging and place it on a
fir
m
fla
t surface. Avoid
installation near heaters or in area subject to direct sunlight. Ensure good air circulation.
Protect the unit from dust, moisture and water. Avoid strong magnetic
field
, e.g. near,
TVs or speakers.
Insert the mains plug into an AC mains supply socket.
Note: Save the carton and packing material, they will be useful if you ever have to trans-
port the unit.
VIDEO & AUDIO OUT
SCART SOCKET AND CABLE
This unit is supplied with a scart cable.
Connect this scart cable to your XB5 and TV to see the lyrics and AUDIO L/R of the CDG
disc on your TV.
USING THE MICROPHONE
The microphone may be used in conjunction with all other sections of the XB5.
PUBLIC ADDRESS
1. Insert microphone into either of the microphone input sockets.
2. Adjust MIC 1 or MIC 2 volume level and master volume control as required.
3. To add ambience to your voice adjust the ECHO control as required.
Note: To prevent howling / whistle occurring ensure that the XB5 is facing away from the
person using the microphone.
IB for 6300027.indd 5
5/17/2006 2:50:37 PM
8. CD or CAMERA
After connecting to your TV power up both the TV and XB5. Select Scart
or AV on your TV. Insert a CDG disc and after short while you will see the CDG disc
graphics on the TV and hear the audio through both TV and XB5 speakers.
Note: If the TV has been correctly switched to AV/Scart mode and you do not see the
CD graphics make sure that the CD/Camera switch (18) on the back panel is set to the
CD position and not the camera position.
Summary of Contents for XB5CDG
Page 4: ...3 LOCATION OF CONTROLS ...
