background image

7

INSTALLING THE SPEAKER WIRE TO THE SPEAKER TERMINALS

1. Speakers Connection

Extend  the  SPEAKER WIRES  and connect  them to the SPEAKER TERMINALS, the wire with white

mark  connect  to  Red  terminal,  the wire without white mark connect to Black terminal.

2. Power Cord Connection

Before  using, connect the AC Power Cord to the AC outlet, then turn on the main switch of the unit.

OPERATING THE UNIT

PLEASE NOTE : THIS UNIT WAS TWO POWER SWITCHES. BEFORE USE PLEASE ENSURE

THE SWITCH ON THE REAR OF THE UNIT IS IN THE "ON" POSITION THEN PRESS THE

STANDBY BUTTON TO TURN ON THE UNIT.

You can press the POWER button on the unit (or on the remote control) to switch the unit ON and

OFF. Pull the AC plug out of the wall socket if you want to switch off completely.

POWER / STANDBY

1. Press POWER button on the unit (or remote) to switch the unit on.

2. Select the sound source (CD, Radio or Aux) by pressing corresponding function key.

3. Adjust the volume with the VOLUME (UP or DOWN) button on remote or by using volume knob on the

front panel.

4. Set  the  preset  equalizer ( classic, rock or pop) with the PRESET EQ button on the unit (or remote)

5. Press POWER button to switch off the unit.

CLOCK SETTING

To set the clock the unit must be in standby.

1. Press and hold MEMORY / C-ADJ. button until "24 H" shows on diplay.

2. Use TUNING / SKIP / SEARCH REV. or F.F. button to set time format. ( 12 hour or 24 hour)

3. Press MEMORY / C-ADJ button again and the hour digits  will  flash. Use TUNING / SKIP / SEARCH

REV. or F.F. button to set the current hour.

4. Press MEMORY / C-ADJ button for a third time and the minute digits will flash. Use TUNING / SKIP /

SEARCH REV. or F.F. button to set the current minute.

5. Press the MEMORY / C-ADJ. button for a final time to set the clock.

TIMER SETTING

1. Press TIMER button until TIMER  is shown on display,

2. Press and hold MEMORY / C-ADJ. button, and then press TUNING / SKIP / SEARCH REV. or F.F.

button to adjust hour on time.

3. Press the MEMORY / C-ADJ. button. Use TUNING / SKIP / SEARCH REV. or F.F. button to

adjust minutes digits of on time.

4. Press and hold "TIMER" button, "TIMER" symbol on the display will illuminate.

5. The volume level wnen the unit turns on is equal to last volume level set and the source

is the last source listened to.

SNOOZE SETTING (for Remote Control)

After the timer has turned on the unit, the snooze button can be used to turn the unit off for FIVE
minutes. After this time the unit turns on again.

TO SET SLEEP FUNCTION

1. If you want to fall asleep to music, press SLEEP button.

2. You  may adjust the radio or CD  player's sleep function to turn off after 90,80,70 up to 10 minutes  of

music. Each press of the button will cycle through each of the options as follows.

90    80    70   60    50    40    30    20   10   OFF    

Summary of Contents for MICRO 1109














Reviews: