6
Getting Started
02
Switching on
Plug the radio into the mains supply
and switch on.
After a brief pause the information
display will light up as displayed
b
elow.
Connecting to a wireless network
When switched on for the first time, you will
need to enter your wireless network details.
To setup your wireless network complete the
following procedure:
Press the
POWER
button and wait
until the following is displayed.
Press
the
SELECT
button.
When scanning is complete, the
name of a wireless network will be
shown.
• If your wireless network is not found,
check that your wireless access point or
router is switched on and connected to your
broadband internet connection.
If the SSID (name of your wireless access point)
is not displayed, turn the SCROLL control to the
right until the correct one is shown.
When the correct wireless network is
shown, press the
SELECT
button.
• If your wireless network uses WEP or WPA
encryption, one of the following screens will
display.
• If your wireless network does not use WEP
or WPA goto step number 7 on the next page.
<Scan for netwo>
Scanning
< JimsRouter >
Enter WEP Key
Enter WPA Key
1
1
2
2
3
4
goodmans_GWF101IP.indd 6
goodmans_GWF101IP.indd 6
19/02/2008 13:13:33
19/02/2008 13:13:33
