background image

7

USING THE FEATURES

USING 

THE FEA

TURES

TROUBLESHOOTING

Before contacting Goodmans Helpline, check the following chart for a possible cause 
of the trouble you are experiencing and for a solution.

PROBLEM

SOLUTION

TV will not turn on

     

  Make sure the power cord is plugged in.

     

 

The batteries  in the remote control may be exhausted. Replace the 

          batteries.

No picture, no 
sound

   

 

Check the interface cable between TV and antenna/cable TV.

     

 

Press the 

POWER button on the remote.

     

 

Press the TV button on the remote, then press the 

SOURCE

         button repeatedly to select the connected video sources.

Poor picture, sound 
OK

    

 

Check the interface cable between TV and antenna/cable TV.

    

 

Try another channel, the station may have broadcast 

         difficulties.

   

 

Adjust the Brightness/Contrast options in the VIDEO Menu.

Picture OK, Poor 
sound

   

 

Sound may be muted. Press the 

MUTE button on the remote.

    

 

Press the TV button on the remote, then press  the VOL.+

        button to increase the volume.

Audio noise

    

 

Move any infrared equipment away from the TV.

Summary of Contents for GTV19W17HDV









































Reviews: