Goodmans GSR85DAB, User Manual

Page: 5 / 26

Portable DAB/FM Radio
Electrical Information
Make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate of the power supply unit supplied with your
Portable DAB/FM Radio. It requires a 230V AC, 50Hz mains supply. Do
not use any other supply.
The mains lead supplied may be fitted with a non-rewireable plug. If you
need to change the fuse in a non-rewireable plug, the fuse cover must
be refitted. If the fuse cover is lost or damaged, the plug must not be
used until a replacement is obtained.
If the plug has to be changed because it is not suitable for your socket,
or becomes damaged, it should be removed and an appropriate plug
fitted following the wiring diagram below. The plug removed must be
disposed of safely, as insertion into a mains socket could be an
electrical hazard.
Important
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
• The blue wire must be
connected to the terminal
marked with the letter N or
coloured black.
• The brown wire must be
connected to the terminal
marked with the letter L or
coloured red.
• No connection is to be made
to the earth terminal of the
plug.
If a 13 Amp (BS1363/A) plug is used, a 3 Amp fuse (BS1362) must be
fitted, or if any other type of plug is used a 3 Amp fuse must be fitted,
either in the plug, adapter or in the distribution board.
This symbol indicates that this unit is a Class II double insulated
appliance and therefore an earth connection is not required.
The Plug must be BS1362/A approved
Fit a 3 Amp fuse
The outer sheath of the cable must be
held firmly by the clamp
LIVE
(Brown)
NEUTRAL
(Blue)