Operation
3
Turning On/Off
3.1
3 2
.
Charging the sound broad
Power On
Press the
button The
button will stay lit
Power Off
Press the
button again
The
button will no longer be lit
:
,
.
:
.
.
The sound board can be powered by USB or by its built in battery
To power
the sound board using the built in battery for portable use
follow the
steps below
-
,
-
,
:
1 Connect the supplied micro USB cable to the DC 5V Input jack on the side of
the sound board.Connect the other end of the cable to a USB power source
(like a computer or a USB charger).
.
2. The battery level indicator on the side of the sound board starts blinking
when it is charging.The battery capacity is indicated by the four LEDs of
the battery level indicator:100%,75%,and 25%. When the sound board is
fully charged, the four LEDs will stay lit.
3. Disconnect the micro USB cable from the sound board.
•
When the battery level is low, the 25% LED of the battery level indicator
on the side of the sound board will blink. Please plug in DC 5V power to
recharge.
3.3 Soundflow
Playback with Soundflow
1. Place your smartphone with audio playing on the top of the sound board.
Start with your phone volume around 50%. You can experiment with
different phone volume levels until you find the right setting for
your phone.
Line up your phone’s speaker with the highlighted lower
bar of the soundboard. You may need to move your phone around to find
the optimal placement.
•
•
2. The sound board amplifies your audio automatically.
3. Press - to adjust volume.
4. For controling audio playback, please use the controls on
your smartphone directly.
Soundflow works with any smartphone or music player with an external
speaker. No wires or cables are required.
•
GSPKBAT01SLT
