Programming the CD player
By programming the CD player, you can play up to 20 tracks in any desired order. (Programmes
can only be set when the CD is stopped.)
1.
Place the disc to be programmed into the CD deck. Press PROG / C-ADJ. button.
2.
The display will show MEMORY and P01
,then will show MEMORY and
TRACK NUMBER. (Fig13)(Fig14)
3.
Use CD SKIP UP or DOWN button to select the first track to be programmed.
4.
When the desired track is shown on the display, press PROG / C-ADJ.
again.
5.
The display will show MEMORY and P02,then will show MEMORY and TRACK NUMBER.
(FIG15)(FIG16)
6.
Repeat this procedure to program other tracks into the memory.
7.
Press PLAY / PAUSE
.
8.
Play starts with the first track of the program.(Fig17)
9.
When all tracks have been played, playback will stop and the display will show the total
number of tracks on the CD.
A programme is erased if you :
Press PROG / C-ADJ. button ,then the STOP button (when playback has stopped).
Turn the unit off.
Open the CD door.
(MEMORY NUMBER)
Button
button
Erasing a programme
Fig13
Fig14
Fig15
Fig16
Fig17
10
