REPEAT ALL TRACKS
To repeat ALL TRACKS on a disc and
play them again and again.
1. Press the Repeat Button twice during
playback .
2. The "
" icon will show steadily (not
flashing) in the display. All the songs on
the CD will be played in order and then
start all over again.
3. To stop the repeat function, press the
Repeat Button once until the "
"
icon removed from the display.
10. CASSETTES
CASSETTE TAPE SELECTION
The quality and condition of the cassette tapes you use will have a direct effect on the
performance of this set.
Low quality tapes tend to break and stretch and a broken tape can easily become
entangled in the drive mechanism, causing major damage. Stretched tapes will run at
uneven speeds and will distort anything recorded on them.
Use only well-known brands of tapes.
Use of C-120 (120 minutes) cassette is not recommended. The extreme thinness of
this tape may result in breakage or other failures.
This set is not designed for CrO2, Fe-Cr or METAL tape use. Therefore, be sure to
use named brand normal cassette tapes.
h
h
h
TO PLAY A CASSETTE TAPE
AUTOMATIC LEVEL CONTROL (ALC)
This product utilizes the latest Automatic
Level Control circuitry, therefore, it is not
necessary to adjust the Volume Control
when recording. This circuit automatically
records at the correct level and prevents
over loading.
NOTE:
While recording you may adjust
the Volume Control as desired
without affecting the recording
operation.
Press the CD Random button in CD stop
mode or during CD playback.
9. RANDOM PLAY OPERATION
REPEAT
x 2
x 1
1. Open the Cassette Door by pressing the
Cassette Stop/Eject Button (in some
cases, you may have to press the
Cassette Stop/Eject Button twice since
this button has combined functions).
2. Insert cassette tape into deck door track.
Make sure the full reel is on the right and
the exposed part of the tape faces
upward, make sure the tape inside is not
slack or loosely wound. If it is, insert a
pencil into the reel and turn until the tape
is wound up.
3. Close the Cassette Door.
4. Press the Tape button after the Power
button has been pressed.
5. Press the Cassette Play Button.
: If the Play button pops up,
reverse the tape or press Rewind.
6. Adjust the Volume Control to your
listening preference.
7. To stop the tape, press the Cassette
Stop/Eject Button.
8. To remove the cassette, press the
Cassette Stop/Eject Button again and
the Cassette Door will open.
NOTE
Unload the cassette tape, reverse it and
re-insert into cassette compartment if you
want to play the other side of the cassette
tape.
REPEAT