SKIPPING TRACKS (SEARCH)
1. This function enables you to find the
beginning of any desired track during
play. Press the SKIP UP button to select
the next track, press again repeatedly to
select subsequent tracks. The Display
will show the track number.
2. Press the SKIP DN button twice rapidly
to select the previous track. Repeated
presses of SKIP DN will select other
tracks
3. When the unit is in the pause mode, it is
also possible to select the beginning of a
certain track by using the SKIP UP button
and SKIP DN button to reach the desired
track. After selection, press CD
Play/Pause button.
4. Press and hold the SKIP UP button to
search forward at a high speed for a
particular section of a song. Press and
hold the SKIP DN button to search
backward. Release the button to resume
normal playback when the section is
found.
7. PROGRAM PLAY OPERATION
PROGRAMMED (MEMORY) PLAYBACK
(up to 20 tracks can be programmed)
8. REPEAT PLAY OPERATION
REPEAT PLAY SINGLE SONG
1. Press PROGRAM Button during stop
mode.
2. "01" will flash in display and the PROG
indicator will flash.
3. Press the SKIP UP or SKIP DN Buttons
until the desired track shows on the
Display. The PROG indicator will flash.
4. Press PROGRAM Button. "02" will flash
in the display and the PROG indicator
will flash.
5. Repeat steps 3 and 4 until all the desired
tracks are programmed.
6. When you finished programming, press
PLAY/PAUSE Button.
7. The Display will show the track number
being played, and the PROG indicator
will remain steadily on during program
play.
8. All songs will play in the order you
programmed.
9. If in middle of play you want to hear the
next programmed song, press SKIP UP
button.
10. When all the songs have finished, the
set will stop. The PROGRAM indicator
will remain on. To see the programme
sequence, press PROGRAM Button
once in CD stop mode.
11. To turn off the power, remember to slide
the FUNCTION Switch to TAPE
(POWER OFF) position.
Programming can only be done
when the CD is stopped.
Press CD STOP Button twice. The PROG
indicator will turn off and the Display will
show the number of tracks on the display.
NOTE:
TO CLEAR THE CD MEMORY
1. When the CD is stopped, press the SKIP
UP/DN Buttons to select the song you
like.
2. Press the REPEAT Button. The REPEAT
indicator will flash in the display.
3. Press PLAY Button. The song selected
will play over and over until the STOP
Button is pressed.
4. To cancel the Repeat Function, press
REPEAT Button twice and the REPEAT
indicator will turn off.
x 1
x 2
