3
Pebble
Quick Setting up
3.1 Getting Started
3.2 Turn on /off the unit
3.3 Adjusting the volume
DC: 4 x 1.5V, battery type AA (not included).
For optimal performance, Alkaline batteries are recommended. These
batteries must be replaced every six months. Use only the size and type
of batteries specified. Respect the polarity indicated in the compartment.
Improper polarity can cause damage to the device. Do not attempt to
recharge the batteries, they can catch fire or explode.
AC :1. Insert the adaptor DC jack into the socket back of the unit.
2. Insert the plug of power cord into a standard wall outlet.
DC: 1. Install the backup batteries in their compartment.
Rotate the Volume/POWER dial clockwise/anticlockwise to turn
ON/OFF the unit. The first time the radio is switched on, it will start up
in DAB mode and automatically scan for the available stations. .
Rotate the Volume/POWER dial clockwise/anticlockwise to
increase/decrease the volume level.
4 Features
4.1 Listen to DAB radio
For best reception, make sure the aerial is fully extended.
2. To switch to DAB,press MODE button until the display
shows DAB.
3. To full scan the stations, press SCAN button.
a. First time use, or after Factory Reset: The unit will automatically
begin to quick scan for DAB stations. A progress bar will
show the progress of the scan.Stations found will be automatically
stored. The number of stations found will also be displayed at the
display. The first station available will be played automatically. If
no DAB signal is detected, “No Signal” will be displayed.
Subsequent use : Your last selected station will be displayed,
tuned and played if possible.
4. Rotate the Tuning /Select dial to scroll the station list,and then
press the Tuning /Select button to play the station.
b.
1.
