background image

29

TV MAIN CONNECTOR PANEL

PICTURE CONNECTION

AUDIO CONNECTION

PC

AUDIO IN

PC IN

VGA

9.7-Connecting to a PC

Connect a monitor cable (15-way D-type) 

cable between the PC and the PC-IN socket 

on the main connections panel on the back 

of your TV This cable isnot supplied. Also 

connect a stereo cable (3.5mm plug at each 

end) between the audio output of your PC to 

the PC AUDIO-IN on the main connections 

panel on your TV. This cable is only required 

if you want to listen to sounds from your PC. 

You can adjust the volume level using 

VOL+/

VOL- 

buttons.

9.7.1-Transition to the PC mode

For your LCD-TV to switch to the monitor 

(PC) mode, press the 

SOURCE

 button on 

your remote control. 

SOURCE

 menu will be 

displayed. Select 

PC

 by pressing the 

Up/

Down

 navigation buttons and press the 

OK

 

button.

9.7.2-PC Access Setting

Enter into the 

SETUP

 menu from the Main 

Menu by pressing the 

MENU

 button in the 

PC mode. In order to make the necessary 

settings in this menu, you can select the 

headings with the 

Up/Down

 buttons on 

your remote control to perform the following 

monitor-related settings.

9.7.3-Auto Position

The most suitable geometric settings 

in accordance with the entry mode are 

configured by this function. For this operation, 

just select the  

Autoposition

 tab and press 

OK

 button.

9.7.4-Horizontal Position

Horizontal position setting.

9.7.5-Vertical Position

Vertical position setting.

9.7.6-Size

This is the pixel clock frequency. User can 

narrow down or enlarge the display by 

selecting a desired value.

9.7.7-Phase

Using the 

Right/Left

 navigation buttons, you 

can ensure that the s and shapes are exactly 

consolidated on the PC image.

9.7.8-PICTURE FORMAT

You can select the PC image to be displayed 

in 16:9 or 4:3 formats.

Summary of Contents for GML26W37HDF




































Reviews: