25
2.2.6.2 PARENTAL LEVEL
Parental Level menu option will not be available if the player is in RESUME (Pre-Stop) mode.
Playing some DVDs can be limited depending on the age of users. The “Parental Control” function
allows playback limitation level to be set by the parent.
Ø
PARENTAL LEVEL
Parental level can be adjusted to one of the eight levels
or “NO PARENTAL”. “NO PARENTAL” or level “8
ADULT” adjustments let you watch all of the DVD titles
ignoring that DVD disc’s parental level. You can watch
the DVD discs, which has the same or lower parental
level than the recorder’s level only.
Ø
CHANGE PASSWORD
The password for parental level can be set and changed by using
this option.
The default password is: 0000.
You have to set a XXXX numeric password when it is the first time
to select a parental level.
You have to enter your password every time you want to watch a movie with a higher parental setting
or to change the parental level of the system.
To change the password, you will be prompted to enter your old password. After that, it becomes
possible to enter a new 4-digit password.
Enter password :
Enter your current password(four numbers you previously set in here)
Enter new password:
Enter your choice for a new password.
Confirm new password:
confirm new password by entering again. Select “OK”.
NOTE:
Do not forget your password. Otherwise you can use the password at last page, to enter this
menu.
2.2.6.3 FACTORY DEFAULTS
When you choose Factory Defaults option, after resetting all your Setup options back to factory
settings, the device will restart itself automatically and first time installation will be displayed. This
operation will take approximately 15 to 20 seconds.
CAUTION:
Parental level and parental password do not change.
2.2.6.4 STANDBY TIME
You can set the standby time as 5, 15 or 30 minutes or set it off by choosing “Off” option from the
menu. The unit goes to standby state if one of the time options is selected and no key press occurs for
the selected time duration while in stop mode.
NOTE
: In monitor mode,device will not switch to standby mode.
