Video port setup
The DVD player is equipped with the following video ports:
Composite Video (V)
Scart(R-G-B)
7
12
After the video output set up, if the picture output is:
NOTE
Distorted ,
B
lack and white (no color),
Picture not full screen
Border part of picture has been blocked.
It could be a result of wrong broadcast system matching
between the player and the TV set.
Press
PAL / NTSC
button in STOP mode to switch
the broadcast system between PAL and NTSC.
See
Function Button - PAL / NTSC switch
of this manual..
Or see
TROUBLE SHOOTING
in this manual.
Default setting
PAL
TV System setting
TV System menu is to set up the output TV system to PAL, NTSC
or Multi:
Multi
NTSC
PAL
Auto switch to PAL or NTSC system according to the disc
if not, the default system is PAL
NTSC TV system
PAL TV system
Ensure no disc in the tray, press
SETUP
button ,
setup menu appears.
1
2
3
Highlight "TV Type" selection, press
ENTER
button,
sub menu appears.
Highlight "NTSC" or "PAL" or "Multi", press
ENTER
button.
Press
SETUP
button to quit.
Press
RIGHT
button , highlight "Preference" option.
Press
ENTER
button , sub-menu appears.
4
5
6
When a DVD disc of NOT correct TV system is loaded or
the TV set of NOT correct TV system with the player,
a distorted video signal may come out on the screen.
4
6
5
2
GETTING STARTED
1
3
-- Preference Page --
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
PAL
ENG
Off
ENG
PAL
Multi
NTSC
Go to Preference Page
General Audio Dolby Video
Preference
