3
Using your remote control
Goes to the first channel in your list
(usually BBC 1)
Switches your TV on or off
Switches the receiver on and off (onto standby)
Switches between TV and radio
Switches between the channel you’re watching
and the channel you were previously watching
Mutes the receiver volume (it can also mute
your TV if you have set up this feature)
Selects the channel the receiver is set up on
(if you have set up this feature)
Increases or reduces the receiver volume. They
can also increase or reduce your TV volume
(if you have set up this feature)
Moves around the on-screen menus
Goes up and down the channel list
Selects options on the on-screen menu
(This button also shows the channel list if you
press it while watching TV.)
6
This receiver has audio description and subtitle services. Many programmes have audio description and
subtitles available, for people with hearing or sight problems.
Press the `Info’ button at any time to view the information display. If the
or
icons are displayed,
audio description or subtitles are available for the current programme.
Audio descriptions
•
To switch on audio description, press the
button. You will hear a high-pitched beep if AD is
available.
•
To switch off audio description, press the
button. You will hear a low-pitched beep.
For more information on audio descriptions, please read the user guide.
Subtitles
•
Press the
button to turn on subtitles. Your TV will display
for a short time.
•
Press the
button to turn off subtitles. Your TV will display
for a short time.
For more information on subtitles, please read the user guide.
Audio description and subtitles
dcs/1/08.11.10
2
Open the remote-control battery cover on the
back of the remote control.
Put the batteries (included with your receiver’s
remote control) as shown on the diagram above.
Put the battery cover back on.
Putting batteries in the remote control
1
2
3
4
The first time you switch on your digital receiver, you
will see a screen like the one shown below.
(You may need to press ‘AV’ on your TV remote
control before you see the welcome screen.)
•
You need to select the type of TV screen you have by
pressing the
button on your remote control.
•
Press
and wait for the digital receiver to start
tuning automatically. This may take a few minutes.
•
When the scan has finished, the digital receiver will
show the message `installation completed
’
.
First-time
installation
5
To change the volume
•
To increase the volume, press the
‘
Vol+
’
button.
•
To decrease the volume, press the
‘
Vol-
’
button.
To select a specific channel
•
To enter the channel number, press the
‘
0
’
to
‘
9
’
number buttons.
To change the channel
•
Press the
‘
P+
’
button to move up a channel.
•
Press the
‘
P-
’
button to move down a
channel.
Channels and
volume
Enters and exits the electronic programme
guide (EPG)
Gives programme information on the TV screen
(This button also shows your favourite channels
list when you are on the channel list screen.)
Goes back to the previous screen you were on
Exits the menu system and goes back to the
last programme you were watching
Enters and exits the menu screen
Enters and exits the help screen
Gives digital teletext
Red,
green,
yellow
or blue
buttons
Changes or goes to different options when on
the digital text pages
to
Chooses channel numbers and numbers on
menus that relate to different options
Switches the audio description on and off
Switches subtitles on and off
